Manual <GP-07LED>
NIPPON Genetics EUROPE GmbH
Mariaweilerstraße 28-30 | 52349 Düren | Germany
www.nipppongenetics.eu
Tel.: +49 (0) 2421 55 496 0
Fax: +49 (0) 2421 55 496 11
[email protected]
[email protected]
22
Taking images using a white light source
Taking images of protein gels
Recording images of protein gels or petri dishes are
possible by adding a white light source and removing
the FastGene
®
amber filter from the lens. The
procedure is shown in the next steps
Exposing the filter
Extend the lens barrel by zooming out. The lens is
now exposed and the filter is ready to be removed.
The filter is hold in place using a magnetic filter
holder. After removing the filter, add the white light
source (
e.g.
our white light transilluminator FG-07)
Removing the filter
After zooming out, you can remove the amber filter
from the lens, by using 2 fingers, as shown in the left
image. The amber filter should now be stored in a
safe, clean storage space and be added as soon as
the image is taken. To add the filter to the lens, just
hold the amber filter close to the lens and the magnet
will pull the amber filter to the correct position.
White Light Transilluminator
Add the white LED transilluminator to the central area
of the Blue/Green LED Transilluminator as shown in
the picture. Turn the switch to battery. Make sure that
the transilluminator is charged, otherwise connect
the transilluminator to a power source using the USB
charger cable. Select the required brightness by
pressing the switch button. Record your image.
