Installation <GP-07LED>
NIPPON Genetics EUROPE GmbH
Mariaweilerstraße 28-30 | 52349 Düren | Germany
www.nipppongenetics.eu
Tel.: +49 (0) 2421 55 496 0
Fax: +49 (0) 2421 55 496 11
[email protected]
[email protected]
10
Installation guide
–
Setting up the FAS-DIGI PRO
Place the unit on a level surface with minimal chance of dropping.
Assembling the camera holder
The camera holder prevents the camera from turning when rotating the zoom ring using the
aluminum adapter and is fixed by two screws to the darkbox and one tripod screw to the camera.
The position of the camera holder must be adjusted according to the camera:
1.
Place the camera with its aluminum adapter in its final position, by adding it to the hole in the
top part of the darkbox.
2.
Add the Battery adapter to the camera. Please note that only one direction is possible.
3.
Close the battery compartment completely and put the cable in the cable channel. Please note:
The camera will not turn on if the battery compartment is not completely closed.
Cable channel
