10
US
Qanto_Id_A5_ 0000.50.65062-US
5. Assembly of Qanto
5.1 General assembly instructions
Anyone who performs connection or assembly work on Qanto or
uses Qanto must have access to these instructions for use. Fol-
low these instructions. Non-observance of the above mentioned
instructions can lead to accidents resulting in severe personal
injury.
If the product is visibly damaged, it must not be installed.
clearance for the movement of the lifting system. When Qanto is
extended upward and to both sides, a clearance of about 7,88”
(200 mm) to other cabinets or shelving must be observed.
A clearance of 11,82” (300 mm) must be observed between Qan-
to and a gas stove.
The electrical system of Qanto must be accessible (e.g., a dou-
ble socket under the cabinet near the base).
Make sure the cables are undamaged.
Before connecting Qanto to the power mains, you must check
whether the voltage on the control unit is correct.
If the control unit causes unusual noises or odours during opera-
tion, interrupt the power supply.
WARNING
!
