Ninja SPECIALTY CM400 Owner'S Manual Download Page 9

17

ninjakitchen.com

16

ninjakitchen.com

4

   The clock will display and count down the  

remaining clean cycle time, which takes 

approximately 60 minutes to complete. 

Your unit will deliver a small amount of 

cleaning solution to distribute it through  

the system. It will then pause, deliver 

additional cleaning solution, and continue  

for 60 minutes. The extended pauses 

allow for maximum cleaning and descaling.

5

   Upon completion, the coffee maker will 

beep, the clock will display 

End

, and the 

CLEAN

 light will turn off.

6

    Empty and thoroughly clean the carafe 

and water reservoir with warm, soapy water  

to remove any cleaning solution that could  

affect the flavor of your coffee.

7

   Fill the reservoir with fresh water up  

to, but not exceeding, the Max Fill line 

and set the empty carafe beneath the 

brew basket. 

8

   Flush the system by running a 

Full 

Carafe, Classic brew

 cycle with water 

only. After the cycle is complete, discard 

the water and thoroughly clean the carafe.

DELAY BREW

CARE & MAINTENANCE

AFTER EACH BREW 

1

   After the unit has cooled, remove the 

filter holder from the brew basket and 

discard the paper filter. Thoroughly wash 

the filter holder with soap and warm 

water or place on top rack of dishwasher. 

2

   Clean the frother whisk after each use. 

Hand-wash thoroughly or place on top 

rack of dishwasher.

3

   Wash the carafe and brew-through lid 

with soap and warm water. Use a bottle 

brush or a cloth to wash the inside of the 

carafe. DO NOT use a wire brush. 

4

   After the coffee maker has cooled, wipe 

down the main unit, showerhead, and 

water reservoir shelf with a cloth and warm 

water. DO NOT immerse the coffee maker 

in water. 

CLEANING THE WATER RESERVOIR

Empty the water reservoir and hand-wash 

or place in your dishwasher.

CLEANING THE CARAFE

We recommend cleaning your carafe with 

warm, soapy water. 
If you want to clean the carafe more 

thoroughly, we recommend using a soft 

foam brush. DO NOT use a wire brush.

CLEANING & DESCALING

NOTE: 

The unit must remain on for the 

Delay Brew function to work. DO NOT 

power off after setting Delay Brew.

IMPORTANT: 

Make sure the Drip Stop is in 

the open position.

NOTE:

 If the 

CLEAN

 light illuminates 

again, then calcium buildup is still present. 

Repeat the cleaning cycle instructions from 

the beginning, and the 

CLEAN

 light will 

automatically turn off when your coffee 

maker is clean.

IMPORTANT: 

DO NOT remove the carafe 

at any time throughout the clean cycle. 

The 

CLEAN

 button will illuminate when a 

cleaning cycle is recommended for your 

unit, as calcium scale buildup could be 

affecting the flavor of your coffee.
To clean and descale your Ninja®

 

Specialty 

Coffee Maker: 

1

   Select  the 

Full Carafe

 size and set the 

empty carafe beneath the brew basket.

2

   Use a descaling solution specifically 

formulated for coffee maker cleaning  

and follow the directions on the package. 

Fill the water reservoir up to, but not 

exceeding, the Max Fill line (50 oz.). 

 OR

   Fill the water reservoir to the Travel Mug 

line (16 oz.) with white vinegar, then fill 

the rest of the reservoir with water up to, 

but not exceeding, the Max Fill line. 

3

   Once the water reservoir is filled, press 

the 

CLEAN

 button.

NOTE: 

To cancel the clean cycle, press  

the Power button or CLEAN button once. 

The unit will beep and stop brewing 

through the cleaning mixture. Continue to 

follow the instructions starting at Step 6. 

NOTE: 

The clean cycle takes approximately 

60 minutes. If you cancel the clean cycle, 

your machine will not be properly descaled.

IMPORTANT:

 Use only white vinegar

1

   Turn the unit on by pressing the  

Power button. 

2

   After filling the water reservoir and 

adding ground coffee to the filter  

holder, be sure the reservoir and  

brew basket are securely in place.  

Place the appropriate-size vessel  

under brew basket. 

3

   Press 

DELAY BREW

DELAY BREW

 will 

illuminate and the clock will begin to 

flash “12:00” or the last Delay Brew  

time that was set. 

4

   Once the proper time has been set, 

select the size of the vessel that you 

would like to brew into. 

5

   Select the brew style that you desire 

from the 4 flashing buttons. The selected 

brew style will remain illuminated.  

6

   Once the time, brew size, and brew style 

have been set, allow 

DELAY BREW

 to 

stop flashing, or press 

DELAY BREW

 

to activate. When activated, the unit 

will beep and 

DELAY BREW

 and your 

selected options will remain illuminated. 

To cancel, press 

DELAY BREW

 again.  

NOTE:

 For best results, we recommend 

rinsing the reservoir after brewing and 

refilling with fresh water for the next brew.

NOTE:

 The glass carafe, brew-through lid, 

removable filter holder, water reservoir, 

flip-top lid, frother whisk, and scoop are 

top-rack dishwasher safe.

NOTE: 

If you attempt to change your 

selections while Delay Brew is set, the 

unit will beep and 

DELAY BREW

 will 

flash. To change your selections, cancel 

DELAY BREW

.

Summary of Contents for SPECIALTY CM400












Reviews: