Ninja SPECIALTY CM400 Owner'S Manual Download Page 8

15

ninjakitchen.com

14

ninjakitchen.com

CUSTOM BREWS

SPECIALTY BREW & FROTHING MILK

CLASSIC AND RICH BREWS

Use the 

Multi-Serve

 

Dial

 to select  

the brew size. Place the empty vessel 

you would like to brew into under  

the brew basket.

Press 

CLASSIC

 or 

RICH

 and the brew will 

begin. Press 

CLASSIC

 or 

RICH

 again to 

cancel the brew. 
The brew will begin, stop, and be quiet 

for a short period of time before it begins 

again. This process is used to evenly 

saturate the coffee grounds. 
The unit will beep to signal a completed brew. 

OVER ICE BREW

FROTHING MILK

You can easily remove the frother whisk by twisting it clockwise.  

To avoid spills, keep your cup below the whisk and carry it to your 

sink or dishwasher for cleaning.

Pour milk into cup, until it is about ⅓ full. (Use more or less milk 

depending on your preference.) For hot froth, microwave 45 to  

60 seconds.
Move the frother into the ready position by swinging the arm  

toward the front.

Hold the cup under the frother and submerge the whisk just below 

the surface of the milk. This allows air to fold into the milk for the 

frothiest results.
Press and hold the frothing button for 30 to 45 seconds.

NOTE: 

Rich brew will yield slightly less brewed coffee than Classic brew.

NOTE: 

You don’t need to adjust the size for Specialty Brew—it always yields 4 oz.

NOTE: 

For single cup, lower the Single-Serve Cup Platform and set your vessel in the center 

of it. Ensure you are using at least a 12 oz. cup for the Cup size, 14 oz. cup for the XL Cup size, 

16 oz. travel mug for the Travel Mug size, and 20 oz. travel mug for the XL Multi-Serve size. 

Use the 

Multi-Serve

 

Dial

 to select 

the brew size. Fill your desired vessel 

to the top with ice cubes and place 

the vessel below the brew basket.

Press 

OVER ICE

 and the brew will begin.  

Press 

OVER ICE

 again to cancel the brew. 

The brew will begin, stop, and be quiet 

for a short period of time before it begins 

again. This process is used to evenly 

saturate the coffee grounds. 
The unit will beep to signal a completed brew.

SPECIALTY BREW 

Place the empty vessel you would like to 

brew into under the brew basket. 

Press 

SPECIALTY

 and the brew will begin. 

Press 

SPECIALTY

 again to cancel the brew.

The brew will begin, stop, and be quiet 

for a short period of time before it begins 

again. This process is used to evenly 

saturate the coffee grounds. 
The unit will beep to signal a completed brew. 

NOTE: 

If brewing an iced blended drink, fill 

the desired vessel with the amount of ice 

recommended in the recipe before brewing.

CLASSIC

RICH

NOTE:

 DO NOT use glassware. However, 

the provided Ninja® glass carafe is safe to 

use due to its specialized glass material.

IMPORTANT: 

Always fill the desired vessel 

to the top with ice before placing it below 

the brew basket. DO NOT add ice to the 

water reservoir.

Summary of Contents for SPECIALTY CM400












Reviews: