background image

4

ninjakitchen.com

5

ninjakitchen.com

   WARNING

To reduce the risk of fire, electric shock, 

serious injury, death, or damage when 

using this appliance, follow these basic 

safety precautions.

General Precautions
1

   Read all instructions prior to using the 

appliance and its accessories.

2

   Carefully observe and follow all 

warnings and instructions. This unit 

contains electrical connections and 

moving parts that potentially present 

risk to the user.

3

 

 ALWAYS

 exercise care when handling 

the Pro Extractor Blades® Assembly. 

The blades are sharp, handle carefully. 

ONLY

 grasp the Pro Extractor Blades 

Assembly by the outer perimeter of 

the blade assembly base. Failure to use 

care when handling the blade assembly 

will result in a risk of laceration.

4

   Take your time and exercise care during 

unpacking and appliance setup. This 

appliance contains sharp, loose blades 

that can cause injury if mishandled.

5

   Take inventory of all contents to ensure 

you have all parts needed to properly 

and safely operate your appliance.

6

   Blades are sharp. Handle carefully.

7

   Unplug the appliance from the outlet 

when not in use, before assembling 

or disassembling parts, and before 

cleaning. To unplug, grasp the plug 

by the body and pull from the outlet. 

NEVER

 unplug by grasping and pulling 

the flexible cord.

8

   Before use, wash all parts that may 

contact food. Follow washing instructions 

covered in this instruction manual. 

9

   To protect against the risk of electric 

shock, 

DO NOT

 submerge the 

appliance or allow the power cord to 

contact any form of liquid.

10

 

DO NOT

 use this appliance outdoors. It is 

designed for indoor household use only.

11

   This appliance has important markings 

on the plug blade. The attachment plug 

or entire cordset (if plug is molded onto 

cord) is not suitable for replacement. If 

damaged, the appliance shall be replaced. 

12

  This appliance has a polarized plug 

(one prong is wider than the other). To 

reduce the risk of electric shock, this 

plug will fit in a polarized outlet only 

one way. If the plug does not fit fully in 

the outlet, reverse the plug. If it still does 

not fit, contact a qualified electrician. 

DO NOT

 modify the plug in any way.

13

 

DO NOT

 operate any appliance with 

a damaged cord or plug, or after the 

appliance malfunctions or is dropped or 

damaged in any manner. This appliance 

has no user-serviceable parts. If damaged, 

contact SharkNinja for servicing.

14

  Extension cords should 

NOT

 be used 

with this appliance.

15

 

DO NOT

 allow children to operate 

this appliance or use as a toy. Close 

supervision is necessary when any 

appliance is used near children.

16

  This appliance is 

NOT

 intended to be 

used by people with reduced physical, 

sensory, or mental capabilities, or lack of 

experience and knowledge, unless they 

have been given supervision or instruction 

concerning use of the appliance by a 

person responsible for their safety.

17

  Before each use, inspect blade 

assembly for damage. If a blade is 

bent or damage is suspected, contact 

SharkNinja to arrange for replacement. 

18

 

DO NOT

 attempt to sharpen blades.

19

 

DO NOT

 allow the unit or the cord 

to hang over the edges of tables 

or counters. The cord may become 

snagged and pull the appliance off  

the work surface.

20

 

DO NOT

 allow any part of the unit to 

contact hot surfaces, including stoves 

and other heating appliances.

21

 

ALWAYS

 use the appliance on a dry 

and level surface.

22

  

NEVER

 place a blade assembly on 

the motor base without it first being 

attached to the cup.

23

   Keep hands, hair, and clothing out of the 

container when loading and operating

24

  

ONLY

 use attachments and accessories 

that are provided with the product or 

are recommended by SharkNinja. The 

use of attachments not recommended 

or sold by SharkNinja may cause fire, 

electric shock, or injury.

25

   During operation and handling of the 

appliance, avoid contact with moving parts.

26

 

 DO  NOT

 operate the appliance with an 

empty container.

27

  

DO NOT

 fill containers past the 

MAX 

FILL

 or 

MAX LIQUID

 lines.

28

  

DO NOT

 microwave any containers or 

accessories provided with the appliance.

29   DO  NOT

 perform grinding operations. 

30

   Before operation, ensure all utensils are 

removed from containers. Failure to 

remove utensils can cause containers to 

shatter and potentially result in personal 

injury and property damage. 

31

 

NEVER

 operate the appliance without 

lids and caps in place. 

DO NOT

 attempt 

to defeat the interlock mechanism. 

Ensure the container and lid are 

properly installed before operation.

32

  

DO NOT

 expose the containers and 

accessories to extreme temperature 

changes. They may experience damage.

33

 

NEVER

 leave the appliance unattended 

while in use.

34

 

DO NOT

 blend hot liquids. Doing so 

may result in pressure buildup and 

steam exposure that can pose a risk of 

the user being burned.

35

  If you find unmixed ingredients 

sticking to the sides of the cup, stop 

the appliance, remove the blade 

assembly, and use a scraper to dislodge 

ingredients. 

36

 

DO NOT

 attempt to remove the 

container and lids from the motor 

base while the blade assembly is still 

spinning. Allow the appliance to come 

to a complete stop before removing lid 

and container. 

37

  Remove the Pro Extractor Blades® 

Assembly from the Single-Serve Cup 

upon completion of blending. 

DO 

NOT

 store ingredients before or after 

blending them in the cup with the 

blade assembly attached. Some foods 

may contain active ingredients or 

release gases that will expand if left in a 

sealed container, resulting in excessive 

pressure buildup that can pose a risk of 

injury. For ingredient storage in the cup, 

use only Spout Lid to cover. 

38

  If the appliance overheats, a thermal 

switch will activate and temporarily 

disable the motor. To reset, unplug 

the appliance and allow it to cool for 

approximately 15 minutes before using 

again.

39

  The maximum wattage rating for this 

appliance is based on the configuration  

of the Pro Extractor Blades Assembly and 

Single-Serve Cup. Other configurations 

may draw less power or current.

40

 

DO NOT

 process dry ingredients without 

adding liquid to the Single-Serve Cup. 

They are not intended for dry blending.

41

  To protect against risk of electrical 

shock, 

DO NOT

 immerse the motor 

base in water or other liquid. Unplug 

the motor base before cleaning.

IMPORTANT SAFEGUARDS

HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE

SAVE THESE INSTRUCTIONS

Read and review instructions for operation and use�

 Indicates the presence of a hazard that can cause personal injury, 

death or substantial property damage if the warning included with this 

symbol is ignored�

For indoor and household use only�

 When using electrical appliances, basic safety precautions should always be 

followed, including the following:

Summary of Contents for NUTRI-BLENDER PRO BN400 Series










Reviews: