6
n i n j a k itc h e n . co m
ENGLISH
SAVE THESE INSTRUCTIONS
36
If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance,
remove the lid, and use a spatula to dislodge
ingredients. NEVER insert your hands into
the pitcher, as you may contact one of the
blades and experience a laceration.
37
DO NOT attempt to remove the container
and lids from the motor base while the
motor and blade assembly is still spinning.
Allow the appliance to come to a complete
stop before removing lids and containers.
38
Upon completion of processing, ensure
that the quad blade assembly is removed
BEFORE emptying bowl contents. The
quad blade assembly is to be removed by
grasping the top of the shaft and lifting from
the bowl. Failure to remove the quad blade
assembly before emptying the bowl results
in a risk of laceration.
39
Remove the Pro Extractor Blades
®
Assembly from the Nutri Ninja
®
cup upon
completion of blending. DO NOT store
ingredients before or after blending them in
the cup with the blade assembly attached.
Some foods may contain active ingredients
or release gases that will expand if left in
a sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Spout Lid to cover.
40
If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately 15
minutes before using again.
41
The maximum wattage rating for this
appliance is based on the configuration of
the Pro Extractor Blades
®
Assembly and
Nutri Ninja Cup. Other configurations may
draw less power or current.
