8
TOLL FREE:
1-800-798-7398
Fig. 6
Using the Ninja
®
Warrior
™
Processing Bowl
Fig. 5
CAUTION:
Blades are sharp! Use extreme
caution when handling the blades.
Always hold the blade assembly by the
shaft.
IMPORTANT
: Do not use the blending
shaft in the processing bowl.
IMPORTANT:
Never run the appliance
empty.
1
Place the processor bowl on a clean, dry,
level surface.
2
Holding the blade by the shaft, place it
onto the spindle pin inside the processor
bowl. (
Fig. 5
)
IMPORTANT:
Place the blade inside the
container carefully as blades are sharp.
WARNING:
DO NOT
try to place the
blade onto the power head and then into
the processor bowl.
3
Add the ingredients to the processor
bowl. Make sure your total of ingredients
don’t exceed the highest measured
marking line on the side of the container.
IMPORTANT:
Never add ingredients into
the processor bowl before placing the
blades in first.
4
Place the gear box into position on top
of the processor bowl. (
Fig. 6
) Rotate to
lock. (
Fig. 7
)
5
Place the power head on top of the gear
box and turn it counter clockwise to
match the arrows and lock it into place.
(
Fig. 8
)
6
For best results when chopping, pulse
the power button.
7
To remove the power head, turn it
clockwise to unlock. Rotate the gear box
to unlock. Remove the gear box and the
chopping blades carefully. Then remove
the ingredients from the bowl.
IMPORTANT:
It is not recommended to
operate the appliance continuously for
more than 2 minutes at a time.
In order to obtain a better
quality of chopping, operate
the unit by using a “Pulse”
method.
Fig. 7
Fig. 8
NJ200_30_IB_ENG_110112.indd 8
11-01-12 11:01 AM