Ninja Master Prep QB900NZ 30 User Manual Download Page 13

13

ONE (1) YEAR 

LIMITED REPLACEMENT WARRANTY STATEMENT

If your product becomes defective due to faulty material or workmanship within a period of 1 year from the date of 
purchase, we warrant to do the following:
 

  

For New Zealand Consumers

: We will replace the product with a new product, free of charge, or repair the 

product at our cost, at our discretion.

 

  

For Australian Consumers

: Our goods come with guarantees that cannot be excluded under the Australian 

Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any 
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if 
the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Your warranty is subject to the following conditions

:

 

   DO  NOT

 operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged or 

dropped in water. To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on 
your own. If the supply cord is damaged, 

it must be replaced by a qualified electrician in order 

to avoid a hazard

. Incorrect re-assembly or repair can cause a risk of electrical shock or injury to persons 

when the appliance is used.

 

  

The product has not been misused, abused, neglected, altered, modified or repaired by anyone.

 

  

The product has been subjected to fair wear and tear.

 

•   The product has not been used for trade, professional or hire purposes.

 

•   The product has not sustained damage through foreign objects, substances or accident.

Your warranty does not cover

:

 

•   Components that are subject to natural wear and tear caused by normal use in accordance with operating 

instructions.

 

•   Unauthorised/improper maintenance/handling or overload is excluded from this warranty.

 

•   For guarantee claims you will need to submit a proof of purchase in the form of a valid receipt that displays 

date and place of purchase.

This warranty does not replace but is in addition to your statutory rights.
This warranty does not apply to accessories supplied with the product.
This warranty applies only to the original purchaser and may not be transferred.
Replacement products will be covered by the limited warranty for the balance of the warranty period from the date of 
the original purchase.
Please note: 
 

Only defective product or parts returned to place of purchase will be replaced under this warranty.

 

New Zealand Contact:

  

 

Australia Contact

 

Brand Developers Limited 

Brand Developers Aust Pty Ltd

 

Level 1, 519-521 Lake Rd, Takapuna, 

461 Plummer Street,

 

North Shore City 0622, Auckland, New Zealand 

PORT MELBOURNE, VIC 3207

 

Private Bag 93204, Parnell, Auckland 1151 

FAX: +61 3 9681 7825

 

FAX: +64 9 306 8203 

AUST Customer Care: 1800 890 840

 

NZ Customer Care 0800 002 999

QB900NZ_30_120626_1.indd   13

12-06-26   12:58 PM

Summary of Contents for Master Prep QB900NZ 30















Reviews: