Ninja Master Prep QB900NZ 30 User Manual Download Page 11

11

5

10 

In order to obtain a better quality of 
chopping, operate the appliance by 
using the “pulse” method.

11

  Make sure that the blades have 

stopped completely before removing 
the power head. 

12

  If the ingredients stick to the side 

of the Master Prep™ bowl, stop the 
appliance, remove the power head 
and the splash guard.  Use a spatula to 
dislodge the pieces and then replace 
the splash guard and the power head. 
Continue processing.

13

  Remove the blade assembly by its shaft 

before you empty the contents of the 
Master Prep™ bowl.

HINTS & TIPS

•  The double chopping blades can be used 

for chopping meat, fish, vegetables, 
cheese etc.

•  For finer chopping, increase the length of 

time you process. 

•  For coarse chopping, use the pulse 

button for a few seconds and monitor 
food texture.

•  Pre-cut larger pieces to make them 

fit into the 

Master Prep™

 bowl. When 

chopping hard foods (e.g. meat, cheese) 
cut into 2-3 cm cubes.

Place the splash guard on the bowl. 
(Fig. 3)

6

  Place the power head on top of the 

splash guard making sure that it is 
securely in place. (Fig. 4)  

DO NOT 

attempt to operate the appliance 
without the safety splash guard in 
place.  

7

  To start the appliance, plug the power 

cord into the electrical outlet, securely 
hold power head while operating 
and press on the on/off pulse button 
located on the top of the power head. 
(Fig. 5)

8

  Hold the Master Prep™ bowl firmly 

while depressing the on/off pulse 
button to ensure the unit stays in place. 

 

NOTE:

 DO NOT 

operate the appliance 

continuously for more than 15 seconds 
at a time.

  

Be careful not to over 

process.  For coarsely chopped foods, 
use repeated short pulsing action until 
the desired consistency is reached.

To stop the appliance, remove your 
fingers from the on/off pulse button. 

3

4

QB900NZ_30_120626_1.indd   11

12-06-26   12:58 PM

Summary of Contents for Master Prep QB900NZ 30















Reviews: