Ninja Foodi XL OL600 Series Owner'S Manual Download Page 14

“ADD POT” error message appears on display screen.

•   Cooking pot is not inside the cooker base. Cooking pot is required for all functions.

“SHUT LID” error message appears on display screen.

•  The lid is open and needs to be closed for the selected function to start.

“ADD WATER” error message appears on display screen when using the Steam or 

Pressure function.

•   The water level is too low. Add more water to the unit for the function to continue.

“NO PRESSURE” error message appears on display screen when using the Pressure 

function.

•   Add more liquid to the cooking pot before restarting the pressure cook cycle.
•   Make sure the pressure release valve is in the SEAL position. 
•   Make sure the silicone ring is installed correctly.

“ERR” message appears.

•   The unit is not functioning properly. Please contact Customer Service at  

1-877-646-5288. So we may better assist you, please register your product online 

at 

registeryourninja.com

 and have the product on hand when you call.

“SLIDE” error message appears on display screen.

•   Move the slider to the position corresponding with the desired cooking function.

“LOCK LID” error message appears on display screen.

•   Move the slider to the PRESSURE position in order to lock the lid.

To order additional parts and accessories, visit ninjaaccessories.com or contact 

Customer Service at 

1-877-646-5288

. We ask that you register your product online at 

registeryourninja.com

 and have the product on hand when you call, so we may better 

assist you.

REPLACEMENT PARTS

1

    For consistent browning, make sure ingredients are arranged in an even layer on the 

bottom of the cooking pot with no overlapping. If ingredients are overlapping, make sure 

to shake halfway through the set cook time.

2

    For smaller ingredients that could fall through the deluxe reversible rack, we recommend 

first wrapping them in a parchment paper or foil pouch.

3

    Use the Keep Warm mode to keep food at a warm, food-safe temperature after cooking. 

To prevent food from drying out, we recommend keeping the lid closed and using this 

function just before serving. To reheat food, use the Reheat function.

4

    When using a recipe for Ninja® Foodi® 6.5-quart models in this unit, some additional 

cooking time or extra shake of the Cook & Crisp

TM

 Basket may be required. 

5

    6.5-quart pressure recipes like soups, stews, and chilies can be scaled up by 50 percent 

in this Ninja® Foodi® model.

HELPFUL TIPS

ENGLISH

TROUBLESHOOTING GUIDE - CONT.

25

ninjakitchen.com

24

ninjakitchen.com

Summary of Contents for Foodi XL OL600 Series

















Reviews: