14
15
ninjakitchenme.com
ninjakitchenme.com
NATURAL PRESSURE RELEASE
VS . QUICK PRESSURE RELEASE
Natural Pressure Release:
Once pressure
cooking is complete, the pressure will start
to naturally release as the unit cools down.
During this time, the unit will switch to Keep
Warm mode. When natural pressure release
is complete, the float valve will drop down.
Quick Pressure Release:
Use
ONLY
when
called for in a recipe. When cooking is
complete, the unit will switch to Keep
Warm mode. Turn the pressure release
valve to the VENT position to instantly
release pressure through the valve. When
quick pressure release is complete the float
valve will drop down. Even after releasing
pressure, some steam will remain in the unit
and will escape when the lid is opened. Lift
and tilt it away from you, making sure no
condensation drips into the cooker base.
NOTE:
At any time during the natural
release process, you can switch to quick
release by turning the pressure release
valve to the VENT position.
WARNING:
Caution HOT Steam emitted.
PRESSURISING
As pressure builds in the unit, the control
panel will display rotating lights. Pressurising
time varies, depending on the amount of
ingredients and liquid in the pot. As the
unit pressurises, the lid will lock as a safety
measure, and it will not unlock until pressure
is released. Once the unit has reached
full pressure, the lid pressure icon light
will glow steadily. The pressure cooking
cycle will begin and the timer will start
counting down.
USING YOUR NINJA FOODI TENDERCRISP
PRESSURE COOKER – CONT .
INSTALLING & REMOVING
THE PRESSURE LID
Place the pressure lid on top of the unit with
the on the lid and the on the base lined
up evenly. Turn the lid clockwise until it
locks in place.
To unlock the pressure lid, turn it
anticlockwise. Lift it up and away from you,
as some steam will remain in the unit and
escape when the lid is opened.
NOTE:
The pressure lid will not unlock
until the unit is completely depressurised.
See page 15.
AIR CRISP
INSTALL
REMOVE
NOTE:
Press the KEEP WARM button
if you would like to turn Keep Warm
mode off.
