background image

17

ninjakitchen.com

16

ninjakitchen.com

 Plug in motor base and place on a clean, 
dry, level surface such as a countertop  
or table.

2  

Add liquid then ingredients to the Power 
Nutri Cup. 

DO NOT

 add ingredients past 

the 

MAX LIQUID

 line.

  

Place the Hybrid Edge™ Blades Assembly 
on the top of the cup and turn clockwise 
to seal.

4  

Turn the cup upside down and install on 
the motor base by aligning the tab on 
the cup with the slots on the base. Then, 
rotate cup clockwise until it clicks. Once 
locked in place, press the Power button 
to turn unit on. The available program 
buttons will illuminate and the unit will 
be ready for use.

IMPORTANT:

 

Review all warnings on 

pages 4–7 before proceeding.

 

NOTE: 

Auto-iQ® programs have pauses and 

changes in speed throughout the cycle.

USING THE POWER NUTRI™ CUP

5a  

If using an Auto-iQ program, use the 
dial to select the program that best 
suits your desired output, then press 
START/STOP. The preset feature will 
automatically stop at the end of the 
program. To stop the unit at any time, 
press START/STOP.

5b    

For Manual mode, press IQ/MANUAL. 
With speed 10 on the display, press 
START/STOP. Once the ingredients have 
reached your desired consistency, press 
START/STOP and wait for the unit to 
come to a complete stop. 

6  

Remove the cup from the motor base 
by turning it counterclockwise and then 
lifting up.

7  

Remove the blade assembly by twisting 
counterclockwise. 

DO NOT

 store blended 

contents with the blade assembly 
attached. Only use the Spout Lid or 
Storage Lid to cover. Exercise care when 
handling the blade assembly, as the 
blades are sharp.

9  

Turn the unit off by pressing the Power 
button. Unplug the unit when finished. 
Refer to the Care & Maintenance section 
for cleaning and storage instructions.

8  

To enjoy on the go, place the Spout Lid 
or Storage Lid onto the cup and twist lid 
clockwise until firmly sealed.

NOTE: 

If the unit is plugged in and powered 

on, but the cup and blade assembly is not 
properly installed, the timer will display “- -” 
and the motor will be disabled.

NOTE: 

Only speed 10 is available when 

using the Power Nutri Cup. 

Summary of Contents for FOODI POWER PITCHER DUO SS300 Series














Reviews: