13
ninjakitchen.com
12
ninjakitchen.com
8
To remove the lid from the pitcher, press
the release button above the pitcher handle,
and rotate the lid tab counterclockwise out
of the lock position, then lift the entire lid up.
IMPORTANT:
As a safety feature, when
the unit is powered on, if the pitcher and
lid are not properly installed, the timer
will display “- -” and the motor will be
disabled. If this happens, repeat step 4.
When the pitcher and lid are properly
installed, and the unit is powered on,
the available programs will illuminate,
indicating the appliance is ready to use.
NOTE:
The feed chute lid features a
2-part pusher to guide food through the
chute. Rotate the top clockwise and lift
to separate the pieces.
1
Place motor base on a clean, dry, level
surface such as a countertop or table,
then plug in the unit.
2
Lower the pitcher onto the motor base.
The handle should be aligned slightly
to the right and the pitcher should be
oriented so the
LOCK
symbols are visible
on the motor base. Rotate the pitcher
clockwise until it clicks into place.
IMPORTANT:
Review all warnings on
pages 4–7 before proceeding.
NOTE:
The slicing/shredding disc is
reversible. Use the side labeled “Slicer” for
slicing. Carefully flip the disc over to the
side labeled “Shredder” for shredding.
9
Using the plastic grip, carefully lift the
disc out of the pitcher. Then, grasp the
spindle by the top of the shaft and lift it
out of the bowl.
11
Turn the unit off by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
10
Remove the pitcher from the motor
base by turning it counterclockwise
and then lifting up.
5a
To use the DISC Auto-iQ® program, press
START/STOP.
5b
For Manual mode, press IQ/MANUAL.
With speed 1 on the display, press
START/STOP.
6a
Add the prepped ingredients you want
to slice, shred, or grate through the feed
chute on the lid. Use the 2-part food
pusher to help guide the food through the
feed chute. The middle piece of the food
pusher is removable to use for narrow
ingredients.
DO NOT
process ingredients
past the
DISC MAX
line on the pitcher.
7a
If using the DISC program, this preset
feature will automatically stop at the end
of the program.
7b
If using Manual mode, press START/STOP
when processing is complete. Wait for
the unit to come to a complete stop.
3
Place the disc spindle onto the drive
gear inside the pitcher. Then, use the
plastic grip to grasp the disc and place it
over the spindle.
NOTE:
The slicing/shredding disc is
reversible. Ensure you place the side
you would like to use facing up.
NOTE:
Grating disc is not available with
all models.
NOTE:
Only speed 1 is available when using
the feed chute lid and disc assemblies.
2-Part Pusher
4
To install the feed chute lid on the
pitcher, place the lid tab to the right of
the handle. Press the lid down until it is
secure. Rotate the tab clockwise until it
clicks into place on the pitcher handle.
Once the lid is locked in place, press the
Power button to turn unit on.
USING THE POWER BLENDER
& PROCESSOR PITCHER & DISC ASSEMBLIES
NOTE:
DO NOT
force ingredients through
the feed chute.
