Ninja Express Chop NJ100 30 Owner'S Manual Download Page 3

2

www.ninjakitchen.com

23. 

DO NOT 

operate the appliance empty.

24. 

DO NOT 

use appliance for other than intended use.

25.  Immediately release the On/Off pulse button on 

the motor head in the event that the appliance 

malfunctions during use. 

26.  To reduce the risk of injury, 

NEVER

 operate the 

appliance without the splash guard and bowl 

in place; 

DO NOT

 try to defeat the interlock 

mechanism; make sure that the cutting blades are 

properly assembled before operating the appliance.  

27.  In the event that the unit overheats, a thermal 

switch will become activated and shut off 

the motor. To reset the appliance, unplug the 

appliance and let it cool down for approximately 

15 minutes before using again.

28. 

THIS PRODUCT IS INTENDED FOR 

HOUSEHOLD USE ONLY. 

Do not use this 

appliance for anything other than its intended 

use. Do not use outdoors.

29.  If the appliance overheats, a thermal switch will 

become activated and shut off the motor. To 

reset, unplug the appliance and let it cool down 

for approximately 10 minutes before using again.

30.  Be certain cover is secured in place before 

operating the appliance.

SAVE THESE  

INSTRUCTIONS

9. 

DO NOT

 let cord hang over edge of table or 

counter, or touch hot surfaces, including the stove.

10.  Always use the appliance on a dry, level surface.
11.  Keep hands, hair, clothing, as well as utensils 

out of container while processing to reduce the 

risk of severe injury to persons or damage to the 

appliance. A scraper may be used but only when 

the appliance is not running.

12.  Avoid contact with moving parts.
13. 

DO NOT 

attempt to sharpen blades.

14. 

DO NOT 

use the appliance if blade assembly is 

bent or damaged.

15. 

DO NOT 

operate this appliance on or near any 

hot surfaces (such as gas or electric burner or in 

a heated oven).

16.  The use of attachments or accessories 

including canning jars, not recommended by the 

manufacturer may result in fire, electric shock or 

personal injury.

17. 

DO NOT

 remove the motor head before the 

chopping blades have stopped turning. 

18.  To reduce the risk of injury, 

NEVER

 operate the 

appliance without the splash guard and bowl 

in place; 

DO NOT

 try to defeat the interlock 

mechanism; make sure that the cutting blades are 

properly assembled before operating the appliance.  

19. 

DO NOT

 expose containers to extreme 

temperature changes.  

20. 

DO NOT 

use containers if they are cracked 

or chipped.  

21. 

DO NOT

 overfill.

22. 

DO NOT

 operate the appliance for more than 

15 seconds.

Summary of Contents for Express Chop NJ100 30













Reviews: