Ninja BL820UK, Owner'S Manual

Page: 12 / 20

11
Fig. 14
Fig. 15
Assembly and Use for the Bowl
ASSEMBLY
WARNING: Never leave the appliance unattended while in use.
Fig. 16a
Fig. 16b
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface
such as a counter or table top.
2 Align and lower the Bowl onto the motor base.
( Fig. 14 ) Handle should be aligned slightly to the
right of the “ LOCK ” symbol on the motor base.
3 Rotate the bowl clockwise as far as it will go to
lock in place. ( Fig. 15 )
4 The bowl can be placed on the motor base two
ways; the handle can be on the front right corner or
the front left corner. ( Fig. 16a, Fig. 16b )
5 Holding the desired blade by the top of the shaft,
place it onto the drive gear inside the bowl. Ensure
that the attachment is seated properly and is
standing upright. ( Fig. 17 )
NOTE : The blade will fit loosely on the star-shaped
post.
6 Add the ingredients to the bowl, making sure that
they do not exceed the highest measured marking
line on the side of the bowl.
7
Holding the lid from the feed chute, place it on top
of the bowl and turn clockwise aligning the arrow
( ) located on the lid with the arrow ( ) located
on the bowl’s handle. (
Fig. 18
)
8 Plug the power cord into the electrical outlet and
press up on the power toggle ( ) to turn the power
“On”.
NOTE: The bowl is not intended for blending
drinks. Do not exceed the “Max Fill” mark on
the bowl.
NOTE: To add liquids during
processing, remove the food
pusher from the feed chute to
drizzle in liquids. Do not remove
the lid while in use.
TIP
: Turn the unit down to the
lowest setting before adding
additional liquids.
Dough &
Processing
Fig. 17
Fig. 18
/
/
/
/
Dough &
Processing