Ninja BL820UK, Owner'S Manual

Page: 11 / 20

10
IMPORTANT: Make sure that the motor base
is plugged in for use.
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Add ingredients to the single serve cup.
NOTE: Do not overfill! Do not exceed “Max
Fill” mark on the cup.
3 Place the single serve blade onto the cup and
screw it on tightly until you have a good seal.
( Fig. 9 )
4 Turn the single serve cup upside down and
place it onto the motor base, aligning the tabs
on the cup with the motor base. ( Fig. 10 )
Turn clockwise until the cup locks in place,
the unit is ready for use. ( Fig. 11 )
5 The single serve cup only operates at one
speed regardless of which number is chosen
on the dial. Press down on the “Start/Stop/
Pulse” toggle in short intervals until you have
reached your desired consistency. (
Fig. 11
)
Fig. 9 Fig. 10
Assembly and Use for the Single Serve Cup
Fig. 11 Fig. 12 Fig. 13
ASSEMBLY PULSE REMOVAL
For best results, use short “PULSES” ... Practise makes perfect!!
6 When you have reached your desired
consistency, turn the single serve cup counter-
clockwise (
Fig. 12
) and pull straight up to
remove. (
Fig. 13
)
7 Turn the cup upright and remove the single
serve blade by twisting the blade assembly
counter clockwise.
8 Place the Sip & Seal
™
To-Go drinking lid onto
the single serve drink cup, screw on to seal
and enjoy!
9 Make sure that the motor base is unplugged
when not in use.
/
/
/
/