background image

2

TOLL FREE:

 

1-800-798-7398

www.ninjakitchen.com

3

26. To reduce the risk of burns, always 

allow the appliance to cool after 

blending hot liquids before taking 

off parts and before cleaning. 

27. If the appliance overheats, a thermal 

switch will become activated and 

shut off the motor. To reset, unplug 

the appliance and let it cool down 

for approximately 15 minutes before 

using again.

28. In the event that the unit flashes 

speeds 1, 2 and 3 from overloading, 

the unit will shut down. Unplug the 

unit and wait 15 minutes to reset.

29. 

THIS PRODUCT IS INTENDED FOR 

HOUSEHOLD USE ONLY. 

Do not 

use this appliance for anything other 

than its intended use. Do not use 

outdoors.

30. The maximum rating is based on 

the 6-Blade Assembly (pitcher) 

that drives the greatest power and 

other recommended attachments 

may draw significantly less power or 

current.

NOTE

: This unit has a short power 

supply cord to reduce the risk resulting 

from becoming entangled in or tripping 

over a long cord. An extension cord 

may be used if you are careful in its use. 
1.   If using an extension cord, the 

electrical rating of the extension 

cord should be rated at least 15 

amperes. Extension cords rated for 

less amperage may overheat.

2.   An extension cord must be arranged 

so that it will not drape over the 

countertop or tabletop where it can 

be pulled on by children or tripped 

over accidentally.

SAVE THESE 

INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL 
APPLIANCES, BASIC SAFETY 
PRECAUTIONS SHOULD ALWAYS 
BE FOLLOWED, INCLUDING THE 
FOLLOWING:

READ ALL INSTRUCTIONS 
BEFORE USING YOUR NINJA

 

KITCHEN SYSTEM 1200

.

POLARIZED PLUG 
WARNING: 

To reduce the risk of 

electric shock, this appliance has a 
polarized plug (one blade is wider 
than the other). This plug will fit into 
a polarized outlet only one way. If 
the plug does not fit fully into the 
outlet, reverse the plug. If it still 
does not fit, contact a qualified 
electrician to install the proper 
outlet. 

DO NOT modify the plug in 

any way.

12. 

DO NOT attempt to sharpen 

blades.

13. 

DO NOT

 use the appliance if blade 

assembly is bent or damaged.

14. To reduce risk of injury, never place 

the blade assembly on base without 

pitcher or bowl properly attached.

15. 

DO NOT

 operate this appliance on 

or near any hot surfaces (such as 

gas or electric burner or in a heated 

oven).

16. The use of attachments or 

accessories including canning 

jars, not recommended by the 

manufacturer may result in fire, 

electric shock or personal injury.

17. 

DO NOT

 remove the container from 

the motor base while the appliance 

is in operation.

18. To reduce the risk of injury, 

NEVER

 

operate the appliance without the lid 

in place; 

DO NOT

 try to defeat the 

interlock mechanism; make sure that 

the attachment is properly installed 

before operating the appliance.

19. 

DO NOT

 expose containers to 

extreme temperature changes.

20. Exercise extreme caution when 

blending hot liquids. 

21. 

CAUTION:

 Do not process food or 

liquid that is hotter than 180°F/82°C. 

Allow very hot ingredients to cool 

before processing.

22. 

DO NOT

 overfill.

23. Extreme caution must be used when 

moving an appliance containing hot 

food, water or other liquids.

24. When processing hot foods or 

liquids, always open the pouring 

spout cap to vent the steam. Keep 

hands and other exposed skin 

away from the opening to prevent 

possible burns or scalding.

25. 

DO NOT 

operate the appliance 

empty.

1.  To protect against electrical shock, 

do not submerge the appliance or 

allow the power cord to come into 

contact with water or any other 

liquid.

2.  Close supervision is necessary when 

any appliance is used by or near 

children.

3.  Never leave an appliance 

unattended when in use.

4.  Turn the appliance Off and remove 

the power cord from the electrical 

outlet when not in use, before 

assembling or disassembling parts 

and before cleaning. To unplug, 

grasp the plug and pull from the 

electrical outlet. Never pull from the 

power cord.

5. 

DO NOT

 abuse the power cord. 

Never carry the appliance by the 

power cord or yank it to disconnect 

from electrical outlet; instead grasp 

the plug and pull to disconnect.

6. 

DO NOT 

operate any appliance with 

a damaged cord or plug, or after the 

appliance malfunctions, has been 

dropped or damaged in any manner. 

Return the appliance to EURO-PRO 

Operating LLC for examination, 

repair or adjustment.

7. 

DO NOT

 let the power cord hang 

over the edge of table or counter or 

touch hot surfaces such as the stove. 

8.  Always use appliance on a dry, level 

surface.

9.  Keep hands, hair, clothing, as well 

as utensils out of container while 

processing to reduce the risk of 

severe injury to persons or damage 

to the appliance. A scraper may be 

used but only when the appliance is 

not running.

10. 

CAUTION:

 Blade assembly is sharp, 

handle with care. When handling the 

blade assembly, always hold by the 

shaft.

11.  Avoid contact with moving parts.

BL700C_30_IB_ENG_110330_1.indd   2-3

11-03-30   9:19 AM

Summary of Contents for BL700C













Reviews: