background image

17

18

www.ninjakitchen.com

1-877-646-5288

PROBLEMS

POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade 
Assembly Doesn’t Rotate.

Make sure the container is securely locked on the motor base.
Make sure the lid is securely on the container in the correct position (align 
arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.

The unit has overloaded. The appliance will stop and the power light will 
flash. Unplug and wait approximately 15 minutes before using again.

The unit has overheated. Unplug and wait approximately 15 minutes before 
using again.
Check to make sure the unit is not overloaded.

Food is Unevenly Chopped.

Either you are chopping too much food at one time, or the pieces are not of 
even size and processing smaller amounts per batch.

Food is Chopped Too Fine or is 
Too Watery.

The food has been over processed. Use Auto-iQ

 Pulse button for 

controlled processing.

Food Collects On Lid or On the 
Sides of the Container.

The mixture is too thick. Add more liquid.

You Cannot Achieve Snow 
From Solid Ice.

Do not use ice that has been sitting out or has started to melt. Use ice 
straight from the freezer.
Start with a few pulses and then go to a continuous blending cycle.

Motor Base Won’t Stick to 
Counter or Table Top.

Make sure surface and suction feet are wiped clean. Suction feet will only 
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces 
such as, wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a 
surface that is not secure, (cutting board, platter, plates, etc.).

You get an “Err” Message

Your Ninja

®

 is able to detect which jar is on the base. You may be trying 

to use a program that is not designed for the jar you have installed. The 
programs will light up indicating which programs are available for each jar.

You have a blinking red light

The unit is not installed properly. For your safety the unit will only be able to 
be turned on when it is properly assembled. Please refer to the assembly 
pages of this inspiration guide for assistance. 

Troubleshooting Guide

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website:

 www.ninjakitchen.com 

 

or feel free to contact customer service:

 1-877-646-5288

.

PRODUCT REGISTRATION

Please visit 

www.ninjakitchen.com

 or call 

1-877-646-5288 

to register your new Ninja

®

 product within ten (10) days of 

purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you 
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions. 

ONE (1) YEAR LIMITED WARRANTY

SharkNinja Operating LLC

 warrants this product to be free from material defects and workmanship for a period of one (1) 

year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and 
exceptions.

The liability of 

SharkNinja Operating LLC

 is limited solely to the cost of the repair or replacement of the unit at our option. 

This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or 
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or 
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by 
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been 
performed by a repair person not authorized by 

SharkNinja Operating LLC

.

If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, 
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service 
support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.

If the appliance is found by 

SharkNinja Operating LLC

 to be defective, in

 SharkNinja Operating LLC

’s sole discretion, we 

will repair or replace it free of charge. Proof of purchase date and a check made payable to 

SharkNinja Operating LLC 

in the 

amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional 
warranties. The responsibility of 

SharkNinja Operating LLC 

if any, is limited to the specific obligations expressly assumed 

by it under the terms of this Limited Warranty. In no event is 

SharkNinja Operating LLC

 liable for incidental or consequential 

damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or 
consequential damages, so the above may not apply to you.

This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from 
province to province. 

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and 
to attach tag to item before packing with your name, complete address and phone number with a note giving 
purchase information, model number and what you believe is the problem with the item. We recommend you insure 
the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package 
“ATTENTION CUSTOMER SERVICE”.

Summary of Contents for BL682QBK












Reviews: