17
CUSTOMER CARE - NZ: 0800 002 999
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Use caution when handling the blade
assemblies as the blades are very sharp.
1
Separate/remove all parts from each other.
2
Clean the motor base with a damp cloth and wipe dry.
3
Place the pitcher, Nutri Ninja
™
cup and bowl in the
dishwasher. Place the lids and attachments on the top rack.
NOTE:
You may also wash the containers by filling ¾ of
the container with warm water and a drop of dish washing
detergent, placing the corresponding lid on the container
and pressing the pulse button a few times. Once clean,
remove the container from the motor base. Rinse the
container, attachment and lid under running water. Allow
all the parts to dry before storing.
If the appliance needs servicing, please call customer
care at 0800 002 999 or 1800 890 840.
Care & Maintenance
HOW TO STORE
1 Store the Nutri Ninja
™
| Ninja
®
Blender System with
AUTO-iQ
™
Technology upright with the pitcher on the
motor base, stacked blade inside the pitcher and lid on
the pitcher. Do not place anything on top. Store the Food
Processor Bowl with the chopping blade inside and the lid
on top. Store the Nutri Ninja
™
cup and the rest of the
attachments along side the appliance or in a cabinet
where they will not be damaged and won’t cause a
hazard.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja
™
| Ninja
®
Blender System with AUTO-iQ
™
Technology features a safety system which prevents
damage to the unit’s motor and drive system should you
inadvertently overload your applianc
e.
If the appliance
is being overloaded, the motor will stop.
Allow
the appliance to cool for approximately 15
minutes.
T
o reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
Pizza Dough
Ingredients:
1/3 tsp Salt
1/4 oz.
Packet Active Dry Yeast
1/2 tsp Sugar
2/3 cup Warm Water (105° - 110°F)
2 cups
All-purpose Flour
1/4 cup Olive Oil
Reserved Flour
Reserved Water
Directions:
1. Combine the yeast, sugar, and warm water in a small bowl and set aside until foamy, about 5 minutes.
2. Place the dough blade into the Food Processor Bowl and add the flour, salt, olive oil, and the yeast mixture. Turn
unit ON and select “LOW/DOUGH”. Process until all of the ingredients come together to form a mass. Remove
the dough and divide in half, kneading the two balls of dough for 1-2 minutes. Place one ball into a lightly oiled
bowl and cover loosely with plastic wrap, allowing to rest and rise for 1 hour. Freeze the other dough ball for up
to two months.
Tip: If the dough is too wet, add a tablespoon of flour. If the dough is too dry, add a tablespoon of water.
Suggested Recipe
