12
ninjakitchen.com
Fig. 5
USING THE DOUGH PADDLE
IMPORTANT:
Use only the “DOUGH” button when
using this attachment.
IMPORTANT:
Use the dough station when using the
dough paddle on SPEED 1/DOUGH.
1
Place the dough station on a clean, dry, level surface
such as a counter or table top with the locking tab in
the back. (
Fig. 2
) Press down to secure the suction feet
to the surface.
2
Place the motor base inside the dough station and push
down until you hear it click into place. (
Fig. 2
)
3
Secure the bowl onto the motor base.
4
Holding the dough paddle by the shaft, place it onto the
drive gear inside the bowl. Ensure that the attachment
is seated properly and that it is standing straight.
5
Add the ingredients and secure the bowl lid onto the
bowl. (
Fig. 4
)
NOTE:
For best results add wet ingredients first and
then add dry ingredients.
6
Plug the power cord into the electrical outlet and press
on the power button ( ).
NOTE:
Please refer to “Speed Settings & Uses” chart
for suggested uses.
Fig. 4
REMOVAL
REMOVING THE DOUGH STATION
1
Once finished using the dough blade or the dough
paddle, remove the bowl from the motor base.
2
To remove the motor base from inside the dough
station, pull the locking tab away from the back of the
motor base while you lift the motor base out of the
dough station. (
Fig. 5
)
3
To release the dough station from the counter or
tabletop, lift the tabs located on suction feet of the
dough station.
DOUGH PADDLE
