7
ninjakitchen.com
6
ENGLISH
7
ninjakitchen.com
6
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions . Do not use appliance for
other than intended use .
31
DO NOT
process dry ingredients with
the Single-Serve Blending Cup and Pro
Extractor Blades™ Assembly, or the
pitcher and Stacked Blade Assembly.
32
DO NOT
perform grinding operations
with the Single-Serve Blending Cup and
Pro Extractor Blades Assembly, or the
pitcher and Stacked Blade Assembly.
33
NEVER
operate the appliance without
lids and caps in place.
DO NOT
attempt
to defeat the interlock mechanism.
Ensure the container and lid are
properly installed before operation.
34
Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
35
Keep hands and utensils out of containers
while chopping to reduce the risk of
severe personal injury or damage to the
blender/food chopper. A scraper may
be used
ONLY
when the blender or
processor is not running.
36
If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
37
DO NOT
open the pitcher’s pour spout
cap while blender is operating.
38
If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients.
NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
39
DO NOT
attempt to remove the
container or lid from the motor base
while the blade assembly is still
spinning. Allow the appliance to come
to a complete stop before removing lids
and containers.
40
If the appliance overheats, a thermal
switch will activate and temporarily disable
the motor. To reset, unplug the appliance
and allow it to cool for approximately 30
minutes before using again.
41
DO NOT
expose the containers and
accessories to extreme temperature
changes. They may experience damage.
42
Upon completion of processing, ensure
the blade assembly is removed
BEFORE
emptying container’s contents. Remove
the blade assembly by carefully grasping
the top of the shaft and lifting it from the
container. Failure to remove the blade
assembly before emptying the container
results in a risk of laceration.
43
If using the pitcher’s pour spout, hold
the cover in place on the container or
ensure lid lock is engaged when pouring
to avoid risk of injury.
44
Remove the Pro Extractor Blades™
Assembly from the Single-Serve Cup
upon completion of blending.
DO NOT
store ingredients before or
after blending them in the cup with the
blade assembly attached. Some foods
may contain active ingredients or
release gases that will expand if left in a
sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Spout Lid to cover.
45
The maximum wattage rating for this
appliance is based on the configuration
of the Pro Extractor Blades™ Assembly and
Single-Serve Cup. Other configurations
may draw less power or current.
46
DO NOT
submerge the motor base or
control panel in water or other liquids.
DO NOT
spray motor base or control
panel with any liquid.
47
DO NOT
attempt to sharpen blades.
48
Turn off the appliance and unplug the
motor base before cleaning.
