Ninja BL620C Series, Owner'S Manual

Page: 13 / 28

12 www.ninjakitchen.com
En
g
lis
h
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja cup.
NOTE: Do not overfill! To avoid spilling, do not
add ingredients past the “Max” fill line.
4
Place the Nutri Ninja blade assembly onto the cup and
turn it clockwise until you have a good seal. (Fig. 1)
5 Turn the Nutri Ninja cup upside down and place it onto
the motor base, aligning the tabs on the cup with the
motor base. Turn clockwise until you hear a click, the
unit is ready for use.
(Fig. 2)
6
Plug the power cord into the electrical outlet and press
the Power button ( ).
7 Press down on the PULSE button in short intervals to
pulse.
(Fig. 3)
Press the Nutri Ninja button to activate
the run cycle. The blender will stop after 60 seconds. To
stop at any time during the cycle, press the Nutri Ninja
button a second time or press the Power button ( ).
Fig. 1 Fig. 2
Assembly and Use of the Nutri Ninja
™
Cup
Fig. 3 Fig. 4 Fig. 5 Fig. 6
ASSEMBLY PULSE REMOVAL
8 Once you have reached your desired consistency, stop
the appliance by pressing the power button and wait
for the blade to stop turning. Turn the Nutri Ninja cup
counter-clockwise and pull straight up to remove.
(Fig. 4, Fig. 5)
9 Turn the cup upright and remove the Nutri Ninja blades
by twisting blade assembly counter-clockwise.
(Fig. 6)
10
Do not store blended contents with the Nutri Ninja blade
assembly attached. For storage, use only the To-Go lid
to cover.
11
Place the To-Go lid onto the Nutri Ninja cup, twist
clockwise to seal and enjoy!
12 Be sure to store the Nutri Ninja blade assembly
attached to an empty cup when not in use.
13
Make sure that the motor base is unplugged when not
in use.
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blades Assembly from the Nutri Ninja cup upon completion of blending.
Do not store ingredients before or after blending them in the cup with the blade assembly attached. Some
foods may contain active ingredients or release gases that will expand if left in a sealed container,
resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.