9
®
N Z : 0 8 0 0 0 0 2 9 9 9
USING THE 2.1 L
PITCHER
(Max Liquid Capacity: 2 L)
NOTE:
Ninja
®
Auto-iQ
™
Technology can sense
which jar is on the motor
base. The function
lights will illuminate
depending on which
container is placed on
the motor base.
USE:
WARNING: NEVER LEAVE THE APPLIANCE
UNATTENDED WHILE IN USE.
CAUTION: USE CAUTION WHEN
HANDLING THE BLADE ASSEMBLY AS IT
IS VERY SHARP.
IMPORTANT: MAKE SURE THE MOTOR
BASE IS PLUGGED IN FOR USE.
1
Once the pitcher is engaged, the programs
available for that attachment will illuminate.
Select the program desired (
H
) based on your
recipe. The Auto-iQ program will stop the
appliance automatically at the end of the program.
NOTE:
Pulse ingredients for even chopping by
holding the
PULSE
button until your desired
consistency is reached.
2
To pause the program, press the selected speed
a second time. When the program is paused, the
light on the program button will flash until you
press it again to resume the rest of the program.
REMOVAL:
1
Turn the pitcher anticlockwise and then lift off
the motor base (
I
).
2
Depending on the consistency of the contents in
the pitcher, open the pour spout cap and use the
pour spout to empty the liquid contents.
3
For thicker consistencies, remove the lid and
blade assembly carefully (by the top of the
shaft), then empty the contents from the
pitcher. To remove the lid, press the release
button on the lid (
J
) and pull the handle up to a
90° angle. Lift the lid off the pitcher.
4
Make sure the appliance is unplugged when not
in use.
5
To release the motor base from the counter or
tabletop, place your fingers under the sides of
the black paddles on the sides of the base and
lift up to release suction cup feet (
K
).
USE
REMOVAL
If your unit comes with this accessory, read the following instructions. For a list of what is included with this model, refer to inside flap of the box.
IMPORTANT: DO NOT OVERFILL. TO AVOID
SPILLING, DO NOT ADD INGREDIENTS PAST
THE “MAX LIQUID” LINE.
CAUTION: THE
BLADE ASSEMBLY
IS NOT LOCKED IN PLACE. IF USING
THE POUR SPOUT, ENSURE THE
LID IS FULLY LOCKED ONTO THE
BLENDER PITCHER.
CAUTION: THE
BLADE
ASSEMBLY
IS NOT LOCKED IN
PLACE. IF POURING WITH THE
LID REMOVED, ALWAYS REMOVE
THE
BLADE ASSEMBLY
FIRST.
H
I
J
K
Summary of Contents for BL492ANZ
Page 1: ...OWNER S GUIDE BL492ANZ...
