Ninja BL480ME, Owner'S Manual

Page: 9 / 16

8 www.ninjakitchenme.com
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3
Make sure that the motor base is plugged in for use.
Lights will not yet illuminate.
4
Add ingredients to the cup.
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line.
5
Place the Pro Extractor Blades Assembly onto the cup
and twist it on tightly until you have a good seal.
(Fig. 1)
6 Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, until you feel it click into place. The
Timer light will illuminate.
(Fig. 2)
7 Press one of the buttons to activate. (Fig. 3)
Use of the Nutri Ninja
™
Cups
ASSEMBLY USE REMOVAL
NOTE:
When using the Auto-iQ
™
presets, the unit will
operate using pulses, pauses and continuous runs. The
pauses allow the contents of the cup to settle. When
the timer reaches “0”, it will stop by itself.
8
To remove the cup, ensure that the motor has stopped
running. Then turn the cup anticlockwise
(Fig. 4)
and
pull straight up to remove. (Fig. 5)
9 Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the Pro Extractor Blades
Assembly anticlockwise. Be sure to store the Pro
Extractor Blades Assembly attached to an empty cup
when not in use.
10
Twist the Sip & Seal
™
lid onto the cup to enjoy your
drink on the go. Press flip top cap firmly into the
opening to get the best seal. The flip top cap locks open
when pressed backward.
11
Make sure that the motor base is unplugged when not
in use.
12
To remove the motor base unit, tip the unit forward
from the rear to easily disengage the suction cups.
Fig. 3 Fig. 4 Fig. 5
WARNING: Handle the Pro Extractor Blades
™
Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of
the user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
IMPORTANT: When processing soft dry ingredients such as day-old bread or cheese use quick, short 1
second pulses. Do not overfill to avoid overheating the appliance. Allow the appliance to cool after each use.
Fig. 2 Fig. 1
or or