background image

2

www.ninjakitchenme.com

23 

DO NOT

 remove any container from the motor 

base while the appliance is in operation. Always 

unplug the unit when not in use.

24  To reduce the risk of injury,

 NEVER

 operate the 

appliance without the blade assembly in place; 

DO 

NOT

 try to defeat the interlock mechanism; make 

sure that the attachment is properly installed 

before operating the appliance. 

25 

DO NOT 

expose containers to extreme 

temperature changes. 

26 

DO NOT

 overfill. Do not exceed “MAX” fill line.

27 

DO NOT

 operate the appliance empty.

28  If the appliance overheats, a thermal switch will 

become activated and shut off the motor. To reset, 

unplug the appliance and let it cool down for 

approximately 30 minutes before using again.

29  To reduce the risk of burns, always allow the 

appliance to cool before taking off parts and 

before cleaning.

30  Max ON time is 1 minute under 1000W load. If 

the appliance overheats, a thermal switch will 

become activated and shut off the motor. To reset, 

unplug the appliance and let it cool down for 

approximately 30 minutes before using again.

31 

THIS PRODUCT IS INTENDED FOR 

HOUSEHOLD USE ONLY. 

Do not use this 

appliance for anything other than its intended use. 

Do not use outdoors.

32  Appliance accessories are not intended to be used 

in the microwave as it may result in damage to the 

accessories.

SAVE THESE 

INSTRUCTIONS

10

  DO NOT

 abuse the power cord. Never carry 

the appliance by the power cord or yank it to 

disconnect from electrical outlet; instead, grasp 

the plug and pull to disconnect.

11 

DO NOT USE

 if the appliance is not working, has 

been dropped, dropped into water, damaged or 

left outdoors.

12

  NO SERVICEABLE PARTS

. Incorrect re-

assembly or repair can cause a risk of electrical 

shock or injury to persons when the appliance is 

used. Contact Customer Service or Service Center 

for the repair or replacement under the warranty 

agreement. 

13  If the supply cord is damaged, it must be replaced 

by the manufacturer, its service agent or similarly 

qualified persons in order to avoid a hazard. 

14 

DO NOT

 let the power cord hang over the edge of 

table or counter or touch hot surfaces such as the 

stove. 

15  Always use the appliance on a dry, level surface.
16  Keep hands, hair, clothing, as well as utensils 

out of container while processing or blending 

to reduce the risk of severe injury to persons or 

damage to the appliance. A scraper may be used 

but only when the appliance is not running.

17  Avoid contact with moving parts.
18 

DO NOT 

attempt to sharpen blades.

19 

DO NOT 

use the appliance if Pro Extractor Blades 

Assembly is bent or damaged.

20  To reduce the risk of injury, never place the 

Blade Assembly on the base without the proper 

attachment.

21

  DO NOT

 operate this appliance on or near any hot 

surfaces (such as gas or electric burner or in a 

heated oven).

22  The use of attachments or accessories 

including canning jars, not recommended by the 

manufacturer may result in fire, electric shock or 

personal injury.

Summary of Contents for BL480ME

















Reviews: