NINJA WARRIOR Century 400 10070630 Operating Instructions Manual Download Page 8

8

86322430 NINJA WARRIOR 150 PSI

Safety

Grounding Instructions

THIS PRODUCT IS FOR COMMERCIAL 
USE ONLY.

ELECTRICAL:

In the USA this machine operates on a standard 15 
amp 115V, 60 hz, A.C. power circuit. The amp, hertz, 
and voltage are listed on the data label found on each 
machine.  Using voltages above or below those 
indicated on the data label will cause serious damage 
to the motors. 

EXTENSION CORDS:

If an extension cord is used, the wire size must be at 
least one size larger than the power cord on the 
machine, and must be limited to 50 feet (15.5m) in 
length.

GROUNDING INSTRUCTIONS:

This appliance must be grounded.  If it should malfunc-
tion or break down, grounding provides a path of least 
resistance for electric current to reduce the risk of 
electric shock.  This appliance is equipped with a cord 
having an equipment-grounding conductor and 
grounding plug.  The plug must be inserted into an 
appropriate outlet that is properly installed and 
grounded in accordance with all local codes and ordi-
nances. 

This appliance is for use on a nominal 120-volt circuit, 
and has a grounded plug that looks like the plug in "Fig. 
A".  A temporary adaptor that looks like the adaptor in 
"Fig. C" may be used to connect this plug to a 2-pole 
receptacle as shown in "Fig. B", if a properly grounded 
outlet is not available.  The temporary adaptor should 
be used only until a properly grounded outlet (Fig. A) 
can be installed by a qualified electrician.  The green 
colored rigid ear, lug, or wire extending from the 
adaptor must be connected to a permanent ground 
such as a properly grounded outlet box cover.  
Whenever the adaptor is used, it must be held in place 
by a metal screw.

Improper connection of the equipment-grounding 
conductor can result in a risk of electric shock.  
Check with a qualified electrician or service person 
if you are in doubt as to whether the outlet is 
properly grounded.  Do not modify the plug 
provided with the appliance - if it will not fit the 
outlet, have a proper outlet installed by a qualified 
electrician.

Summary of Contents for Century 400 10070630





















































Reviews: