Page 12
Espresso capsule coffee maker
TROUBLESHOOTING
If the machine is not working properly make the simple checks set out below. If the problem is not among those listed or if it still persists, even if you follow the advice given,
contact an authorized dealer.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Espresso coffee maker won't start.
The coffee is too cold.
Coffee is not being dispensed or it is being done to
slowly.
Not properly plugged into the power
The machine is not ready to use.
Not enough water in the tank.
Make sure that the espresso coffee maker is properly
plugged in.
If the machine does not react on pressing a drink button
it needs to pre-heat.
Please wait approx 35 seconds until all buttons are
permanently lit. Then make your selection.
Make sure that the water level in the tank is right and if
necessary add (cold) fresh drinking water.
The drink volume is incorrect.
The drink volume is not set correctly.
Adjust the volume to the desired volume.
See instructions on page 11 " Programming the water
volume."
The lever does not close or open properly.
The empty capsule bin might be full.
Please empty the bin before continuing.
The machine just makes noise and does not deliver the
right drink volume.
The water tank might be empty.
If the tank is empty: remove it, refill and replace