Ningbo Winlim Electric Appliance Co., Ltd WBL-003 Instruction Manual Download Page 3

11. Keep hands, hair, clothing, as well as utensils out of jar while processing to

reduce the risk of severe injury to persons or damage to the appliance. A

scraper may be used but only when the appliance is not running.

12. CAUTION: Blade assembly is sharp, handle with care. When handling

the blade assembly, always hold by the base of the blade assembly.

13. Avoid contact with moving parts.

14. DO NOT attempt to sharpen blades.

15. DO NOT use the appliance if blade assembly is bent or damaged.

16. To reduce risk of injury, never place the blade assembly on the base

without the proper attachment.

17. DO NOT operate this appliance on or near any hot surface (such as gas or

electric burner or in a heated oven).

18. The use of attachments or accessories not recommended or sold by the

manufacturer may cause fire, electric shock or personal injury.

19. DO NOT remove the jar from the motor base while the appliance is

running.

20. To reduce the risk if injury, NEVER operate the appliance without the blade

assembly in place; DO NOT try to defeat the interlock mechanism; make sure

that the attachment is properly installed before operating the appliance.

21. DO NOT expose jars to extreme temperature changes.

22. CAUTION: DO NOT PROCESS HOT FOODS OR HOT LIQUIDS.

23. DO NOT overfill.

24. DO NOT operate the appliance empty.

25. If the appliance overheats, a thermal switch will become activated and

shut off the motor. To reset, unplug the appliance and let it cool down for

approximately 30 minutes before using again.

26. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not

use this appliance for anything other than its intended use. Do not use

outdoors.

Summary of Contents for WBL-003

















Reviews: