MPPT Solar Charge Controller
Model :MPPT-30
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ningbo Star Solar Co.,Ltd Tel:(86) 574 26266608
Fax:(86) 574 26266618 56664636 Email:[email protected]
Http://www.pvsolarchina.com
3.1 Voltage display
This is the main interface (see as the right chart), and it shows the charging
and discharging state, battery voltage and capacity. And the parameters of the
solar panels are the current MPPT voltage and battery voltage. MPPT30 will
track the maximum power point automatically within 15 minutes after the
system is connected well.
For the 24V system, the maximum voltage of solar panels will be higher than
battery voltage by 5-20V.
For the 48V system, the maximum voltage of solar panels will be higher than
battery voltage by 5-40V.
3.2 Load opening and closing controlling
At the main interface, you can use
to open or close the load, and at other
interfaces, this button does not have this function.
