MPPT Solar Charge Controller
Model :MPPT-30
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ningbo Star Solar Co.,Ltd Tel:(86) 574 26266608
Fax:(86) 574 26266618 56664636 Email:[email protected]
Http://www.pvsolarchina.com
3. Operation
①
Description of LCD graphic symbol
②
Description of Button Function
:
Interface loop switch button, use the button to cycle between pages in each
switch cycle sequence shown in (figure 1)
:
Adjustment of parameters plus buttons. In addition, at the state in the
parameter view, long press the button more than 5 seconds, all parameter to
restore factory setting.
:
Adjustment of parameters minus button. In addition, in the main
interface, click this button to switch the load.
③
View and set the parameters:
The controller will default entry “battery voltage” interface after correct
power-on. This is the main interface. Use the button could in turn visit the
following parameters interface. If that interface could be set, long press the
button
（＞
5seconds
，
numbers start flashing
）
To enter the parameter setting
interface; set out the parameter interface after long press the button again.
(The numbers stops flashing)
