background image

3

4

To prevent from the risk of fall,your child should always be fastened.

12.

13.

14.

15.

16.

17.

18.

19.

20.Notice

It is dangerous to make any alteration or additions to the device without

 

the 

approval of the competent authority,and a danger of not following closely

 

the 

installation instructions provided by the child restraint manufacturer.

This child safety seat is designed for children from 9 to 36 kg.Never overload 

the child safety seat more than one child or with other loads.

The child restraint must not be used without the cover.

The seat cover should not be replaced with any other than the one recommended 

by the manufacturer,because the cover constitutes an integral part of the restraint 
performance.

Before you adjust any movable or adjustable parts of your child safety seat,you 

must remove your baby from the child safety seat.

The child safety seat should be kept away from sunlight if the seat is not provided

 

with a textile,otherwise it may be too hot for the child’s skin.

Never use a second-hand product,as you can never be certain what was happened 

to it.

Do not use in any configuration not shown in the instructions.

1. Vital information-READ NOW

For your child’s safety,please read these instructions carefully before use and keep 
them for future reference.Failure to follow the instructions contained in this manual 
could result in serious

 

injury to your child.

This child safety seat can only be used with the harness for children 15kg to 36kg 

in weight( group  I,

15-36 kg).

This instruction manual can be retained in the special space of the child seat for its 

life period.

1.

2.

I III:

Do not use this child safety seat at the home. It has not been designed for home use 

and should only

 

be used in  your car.

The child safety seat should be changed when it has been subject to violent stresses 

in an accident.

Always make sure that any straps holding the seat restraint to the vehicle shall 

be tight,any straps restraining the child should be adjusted to the child’s body,and 
check that the straps shall not be twisted.

IMPORTANT!

Ensuring that any lap straps is worn low down,so that the pelvis is

 firmly engaged.

Do not use any load bearing contact points other than those described in the 

instructions and marked in the child restraint ,when in doubt ,please contact the 
child restraint manufacturer..

Any luggage or other objects liable to cause injuries in the event of a collision 

shall be properly secured.

The rigid items and plastic parts of a child restraint must be so located and installed 

that they are not liable,during everyday use of the vehicle to become trapped by a 
moveable seat or in a door of the vehicle.

3.

4.

5.

6.

7.

8.

9.

10.

11.

Never leave your child unattended in the child restraint system even for a short time.

This child restraint should be securely belted in the vehicle even when not in use

.

In a crash or sudden stop

,

an unsecured child safety seat may injure other occupants

.

Summary of Contents for LM229











Reviews: