Ninety One Meraki E Series User Manual Download Page 7

Page: 7 / 49

© Alpha Vector India Private Limited | Ninety One

Do not put any metal objects in charge hole or battery circuit, it may cause a short
circuit, start a fire, or cause an explosion with personal injury or property damage.

NOTE: Max weight of Rider + L Bike = 110 Kg

NOTE: BEFORE TRANSPORTING THE BIKE AND/OR BATTERY, CONTACT
CUSTOMER SERVICE AT

7778001408

FOR SPECIFIC DETAILED INSTRUCTIONS.

ALWAYS WEAR A HELMET-IT COULD SAVE YOUR LIFE!

A properly fitting, ISI approved, bicycle helmet should be worn at all times when riding your

bicycle. The correct helmet should:

- have good ventilation

- cover the forehead and fit correctly

- be securely fastened on the rider

Do not put any metal objects in charge hole or battery circuit, it may cause a short

circuit, start a fire, or cause an explosion with personal injury or property damage.

NOTE: Max weight of Rider + L Bike = 110 Kg

NOTE: BEFORE TRANSPORTING THE BIKE AND/OR BATTERY, CONTACT
CUSTOMER SERVICE AT

7778001408

FOR SPECIFIC DETAILED INSTRUCTIONS.

ALWAYS WEAR A HELMET-IT COULD SAVE YOUR LIFE!

A properly fitting, ISI approved, bicycle helmet should be worn at all times when riding your

bicycle. The correct helmet should:

- have good ventilation

- cover the forehead and fit correctly

- be securely fastened on the rider

Forehead Covered

Forehead Exposed

Summary of Contents for Meraki E Series


















































Search results

Summary of Contents for Meraki E Series

Reviews:

Related manuals for Meraki E Series

Brands by name

Popular brands

Ninety One Meraki E Series, User Manual

Search results

Summary of Contents for Meraki E Series

Reviews:

Related manuals for Meraki E Series

Brands by name

Popular brands