Ninebot Remote Keyfob Service Manual Download Page 3

Page: 3 / 3

Service Manual

Pairing a Keyfob

Tools Required:

Phillips-head screwdriver

Paperclip

Procedure

1. Make sure the PTR is powered off and the charger is

not connected.

2. Using a Phillips-head screwdriver, remove the right-

hand screw on the charge port (

3. Insert a paperclip or similar tool into the hole that the

screw came out of.

4. Momentarily press the button at the bottom of the

hole.

NOTE

You should see a red light in the hole.

5. Press the Power Button on the keyfob.

NOTE

You should see the red light blink four times.

6. Test the newly-paired keyfob by using it to turn the

PTR on and off.

7. Reinstall the fastener.

Figure 69: Charge port screw

Summary of Contents for Remote Keyfob

Page 1: ...ing the keyfob battery and pairing the keyfob Replace a Keyfob when troubleshooting determines that it is broken Safety CAUTION When a repair involves removing disconnecting or handling electronic components use best practice electrostatic discharge ESD control procedures to avoid damaging sensitive electronic components Remote Keyfob Contents Keyfob Battery Pairing a Keyfob ...