06
07
2.
Install training wheels or kickstand
Unscrew the nut from rear wheel and
install training wheel. Install both wheels.
Unscrew the nut from the left rear wheel and
install kickstand in the order as shown.
Nut
Nut cover
Nut
Nut cover
3.
Assemble handlebar
Minimum insertion
mark should not be
visible
Bolt
Insert the head stem into the front fork stem.
Adjust the handlebar to proper height and
make sure it's perpendicular to vehicle body.
Tighten the bolt with 6mm Allen wrench
(Torque 18 N•m).
5.
Tighten left pedal counterclockwise
R
L
4.
Tighten right pedal clockwise
Quick set-up:
1.
Remove nut protector and install nut cover
This product must be assembled and adjusted by adults only! Please keep disassembled
parts in the accessory box for future use.
Scan the QR code to watch assembly tutorial.
4
Assembly
Preparation: Take out tools from accessory box
Open-end wrench
6mm Allen wrench
5mm Allen wrench
Pull out nut protector
Front wheel:
after removing nut protector, put the
nut cover on the nut.
Rear wheel:
See the next step for installation.
* Do not rotate the nut protector; otherwise the nut
may be dislodged.
