3
二.产品介绍
Charger status
To be charged
Charging
Full charge
Charging error
Charger indicator status
Off
Solid on
Slow flash
Quick flash
3.
Main parts model and specification
：
4.
WIFI camera’s specifications and parameters
：
Ⅲ
.
Operation Manual
1.Charging the Li-po battery
：
Transmitter
：
NE-TXOS216-D
，
2.4GHz 4CH
Receiver
：
NE-MASF15
Charger: NE-CH1020M USB Charger
Motor
：
8520 DC motor
Battery
：
3.7V 700mAh Li-po battery
Memory: Accepts up to 32G Micro SD card
Camera Size: 45mm L x 25mm W x 8mm H
Codec Video: Motion JPEG, 1280X720, 30fps, file extension . flv
Codec Audio: Mono
Still Image Capture: 1280 x 720, 96 dpi, file extension .jpg
WIFI Control Distance: About 100 meters (No Interference and No obstacles)
Warning
！！
The charger contains protective circuitry. If you experience any difficulties while
charging the battery, please disconnect the battery from the charger and unplug the charger from the
power source. Allow the battery and the charger to rest for two hours as this will allow the charger
protection circuit to rest. If this issue re-occurs during normal use, please contact technical support
for further assistance.
1) Plug the USB charger into your USB port.
2) Plug the Li-po battery into the USB charger. The power indicator light on the charger turns to solid
on. It means charging. Once charging is finished, the power indicator light will flash slowly. Please
pull them out.
Below table shows different status in charging.
NE-MASF 15 2.4GHZ 4CH Quadcopter
