10
C.Push the throttle trim button upwards and then the tail indicator light turns to quickly flashing.
D.During its flashing, press the
throttle stick (the left stick) one
time to save. Finally the tail
indicator light will be solid on.
Acceleration sensor calibration is
done(As left picture shown).
向下按一次摇杆后松开
6.Video and photo shooting
(
1)Video Shooting
Power on transmitter by following instruction and connect LI-PO battery to quadcopter. Then open the
software on mobile phone and link camera. After successfully linked, the live image will be shown in
mobile phone screen.
Press button “VIDEO /PICTURE ON”
one time on the top right corner of
transmitter backside, and WIFI
camera will start camera shooting.
Press button “VIDEO OFF” one time
on the top left corner of transmitter
backside to stop shooting and save
videos.
(2)Photo Shooting
Method 1: Under above video shooting mode, press the button “VIDEO /PICTURE ON” one time on
the top right corner of transmitter backside, WIFI camera will take one picture. If camera is not in
video shooting mode, please press the button “VIDEO/PICTURE ON” one time to enter into video
shooting mode. Then press again “VIDEO/PICTURE ON” to take one picture.
Method 2: Click the mobile screen and camera control icon will appear on the screen. Then click the
camera control icon, it will take one picture.
press the throttle stick one time to save
NE-MASF 15 2.4GHZ 4CH Quadcopter
