4
[8]
key, then release the pressed keys, the LED will blink twice and then off, the
current code unlocked.
Remark
: Only one device can be fixed.
Device Code Display
The device code is a 3-digit number and any one of the 3 digits can be indicated:
1. Strike the device key which code no. You want to display.
2. Press and hold the [SET] key, in the mean time press the digit that you want to
display, such as 1,2,or3.
3. Release the both pressed keys
4. Count the times the LED blinks, and the blinking time is the digit. If there is no
blink, the digit is zero.
For example: for code 138
SET+1 (first digit): LED blinks 1 time
SET+2 (second digit): LED blinks 3 times
SET+3 (third digit): LED blinks 8 times
Reset
Use the Reset function to erase all the set up data.
1. Press and hold the [SET] key.
2. Then press and hold the [0] key for more than
3 seconds
.
3. Then release the both pressed keys, the LED will blink twice then off, your
remote control got reset.
Others
a.
After you have finished set-up,
first
please press the device key (TV or…) on
remote control that you want to use, and then operate your remote control
normally.
Summary of Contents for MAN2004
Page 1: ......
