2
Remark
: In the process of setup, if you want to quit from setup mode, please press
device key. (If no key pressed in 10 seconds, the remote control will leave the set up
mode automatically.)
B. Set Up by Manual Search:
After you have set up by device brand code several times, the remote control still
doesn't work (i.e. The device still can not be controlled by this remote control), or
you can not find the correct code in the Device Brand Code List, you can use
"
Manual Search
" to find out the reactive Code:
1. Power on the device that you want to control.
2. Press and hold the
[SET]
keys. Then press the device key in remote control,
such as
[TV]
, etc
3. The LED will be on at moment. Then
release
the pressed keys.
4. Point the remote control to the device, strike the
[POWER]
key. If it's DVD,
you can press either [POWER] key or [PLAY] key, the remote control enters
into" Manual Search" mode and the LED keeps flashing.
5. See if device reacts or not. If it works, turn to step f; If not, repeat step d every
1 second.
6.
Test
other keys. If keys work well enough, press the
device
key to quit from the
search mode. If most keys don't work well enough, repeat step d-f to find the
best code.
Remarks
:
a.
Whenever you want to leave or change search mode, press the device key to quit,
and the LED will turn off.
b.
In the Manual Search Mode, besides the [POWER] key ([POWER] key and
[PLAY] key in case of DVD), all other keys' function can be checked normally.
That is to say you can test other keys without leaving Manual Search mode. It
will leave Manual Search mode automatically if no key pressed in 30 seconds.
c.
You may use the SET key to change the search direction from forward to
backward or from backward to forward.
d.
After you press [POWER] 154 times in TV (or 59 times in DVD). If device still
does not react from remote control that means this remote control may not work
for your device.
Summary of Contents for MAN2004
Page 1: ......
