background image

 

15

HOW TO PLACE THE WASHING

CAUTION

  Do not dry garments or 

similar items that have been treated with 

petrol or other volatile and flammable 

substances. This may lead to the 

formation of an explosive gas mixture.

USER TIPS

DRYING

 Always follow the washing instruc-

tions on garments if such instructions 
are provided.

  If fabric softener or antistatic product 

is used, the manufacturer’s instruc-
tions concerning the utilisation of 
the product should be followed.

  Remove washing that is already dry. 

This will reduce the drying time for 
remaining washing.

NOTE

  If the sealing strip does not close 

completely, or if the door has a tendency 

to want to open, this may be due to the 

cleaning filter not having been installed 

correctly. Make sure that the cleaning 

filter and the filter holder are pressed 

down so that no air leakage occurs.

The cabinet contains three sections with 
hangers. Each section has a number of 
bars on which to hang the washing.

p

  Hang the articles in the drying cabinet 

according to how much space they re-
quire – not according to their weight.

p

  Turn up the two bottom hanger sec-

tions if long garments are to be dried.

p

  Hang gloves, caps, scarves and similar 

items on the hanger strips on the 
inside of the door.

p

  Draw the hanger hooks in the upper 

hanger section forward so that the 
washing can be hung more easily. 
Push them back when not in use.

p

 Do not overload the drying cabinet. 

If you do, the washing will become 
creased and dry unevenly. Instead, 
leave a space between the garments 
if possible.

p

  Do not place shoes or similar items on 

the shoe rack in such a way that they 
obstruct the air flow.

p

  Avoid drying heavy items of clothing 

together with lighter items as they 
have very different drying times.

p

  Make sure not to hang knitted items. 

These will stretch unnecessarily as 
they are heavy when wet.

p

  Avoid hanging textiles that are dripping 

or soaking wet in the drying cabinet, as 
the drying cabinet is not intended to 
collect large volumes of water.

  This also leads to abnormally long 

drying times.

NOTE

  When the cabinet is cold, it can 

happen that the sealing strip in the door 

does not close completely. However, this 

is fully compensated when the cabinet 

warms up as the sealing strip expands.

Summary of Contents for ECO Dryer 2.0 HP


























Reviews: