Nimco WK-300-1-0, Manual

Page: 14 / 16

Directional Control Valve
14
Series CV 652
Assembly Instructions
1. Place the two spacers in the desired position.
2. Pull out the security lock and draw the cables through the two holes in the housing.
3. Insert the cable joints and the pivot post in the yoke.
4. Push the cable joints and pivot post down into the housing.
5. Fasten the pivot post by assembling the screw and tightening it to 6-7 Nm using a 5 mm Allen wrench.
6. Lock the cables by tightening the two stop screws with 3-4 Nm using a 4 mm Allen wrench