The signal quality parameters for all other modems are as follows:
PN 1002634 REV 1
© NimbeLink Corp. 2021. All rights reserved.
22
Parameter
Notes
<rxlev>
Received signal strength level (see 3GPP TS 45.008 subclause 8.1.4). For
2G networks only.
0
rssi < -110 dBm
1
-110 dBm ≤ rssi < -109 dBm
2
-109 dBm ≤ rssi < -108 dBm
...
...
61
-50 dBm ≤ rssi < -49 dBm
62
-49 dBm ≤ rssi < -48 dBm
63
-48 dBm ≤ rssi
99
Not known or not detectable or if the current serving cell is not a GERAN
cell
<ber>
Bit error rate (in percent). For 2G networks only.
0-7
RXQUAL values in the table in 3GPP TS 45.008 sub clause 8.2.4.
99
Not known or not detectable or if the current serving cell is not a GERAN
cell
<rscp>
Received signal code power (see 3GPP TS 25.133 subclause 9.1.1.3 and
3GPP TS 25.123 subclause 9.1.1.1.3). For 3G networks only.
0
rscp < -120 dBm
1
-120 dBm ≤ rscp < -119 dBm
2
-119 dBm ≤ rscp < -118 dBm
...
...
94
-27 dBm ≤ rscp < -26 dBm
95
-26 dBm ≤ rscp < -25 dBm
96
-25 dBm ≤ rscp
255
255 - not known or not detectable or if the current serving cell is not a
UTRA cell
<ecno>
Ratio of the received energy per PN chip to the total received power
spectral density (see 3GPP TS 25.133 subclause). For 3G networks only.
