3. APN Setup
3.1 Introduction
GSM and LTE-based Skywire modems can be setup to use different APNs. For
Skywires that use AT&T and T-Mobile service, the correct APN is often needed to
register on the network and pass data. For Verizon Skywires, it may be beneficial to use
a setup that necessitates using a different APN.
3.2 Common Verizon APNs
The most common reason for needing a different APN is because you are using a
particular IP address type.
If you activated your Skywire modem on
https://go.nimbelink.com
, it uses a Private IP
address and the APN:
NIMBLINK.GW12.VZWENTP
If you have changed your IP address type to a Public Dynamic IP address, the APN will
be:
VZWINTERNET
Finally, if you have changed your IP address type to a Public Static IP address, the APN
is most likely:
MW01.VZWINTERNET
However, it may be different depending on your location.
For changing your IP address type, or to get your APN, please contact us at
.
Please include the following information:
-
IMEI of your Skywire modem
-
Model of your Skywire modem
-
SIM ID of your SIM card
If you activated your service for your Skywire from Verizon directly or another carrier,
please contact your representative at that company for the APN you should use.
3.2 Common AT&T/T-Mobile APNs
Cellular carries based on AT&T and T-Mobile service requires using a unique APN to
register on the network and pass data.
If you activated your Skywire modem on
https://go.nimbelink.com
, here are the following
APNs to use:
AT&T Service
10569.mcs
PN 30229 rev 9
© NimbeLink Corp. 2018. All rights reserved.
18
