USER MANUAL
ENGLISH
BA 551 - BA 551D - BA 551CD - BA 611D
909 6752 000(3)2010-03 A
27
CLEAN WATER FILTER CLEANING
(For machine with EcoFlex™ system)
Drive the machine on a level
fl
oor.
1.
Turn the ignition key (80) to “0”.
2.
Open the cover (22) and check that the recovery tank (21)
3.
is empty, otherwise empty it with the drain hose (16).
Grasp the handle (41) and carefully lift the tank (40).
4.
Slightly lift the hoses (A, Fig. 10), then, operating on the
5.
clean water
fi
lter assembly (F) unscrew the transparent
cover (B) and remove the
fi
lter strainer (C). Clean and
install them on the support (D).
NOTE
The
fi
lter strainer (C) must be correctly positioned on
the housing (E) of the support (D).
Install the hoses (A) and the
fi
lter assembly (F).
6.
FUSE CHECK/REPLACEMENT
Disconnect the battery connector (12).
1.
Move aside the recovery water drain hose (16).
2.
Remove the battery charger cable (I, Fig. 11), if equipped,
3.
from the cable holder (J).
Remove the screws (A) and carefully move aside the panel
4.
(B) by disengaging the grommet (K) from its housing on
the panel (B).
Check/replace the following fuses:
5.
Brush deck fuse F1: (40 A)
C)
Vacuum system fuse F2: (30 A)
D)
Drive system fuse F3: (30 A) (*)
E)
Signal circuits fuse F4: (3 A)
F)
Brush/pad-holder release fuse F5: (20 A) (*)
G)
Pump fuse F6: (3 A) (*)
H)
Only for
(*)
BA 551D
,
BA 551CD
,
BA 611D
Perform steps 1 to 4 in the reverse order.
6.
F
B
C
D
F
A
E
C
Figure 10
S311318
F G H
A
A
B
A
A
J
I
C
D
E
K
Figure 11
S311318
909 6752 000(3)2010-03 A.indb 27
909 6752 000(3)2010-03 A.indb 27
04/03/2010 15.01.30
04/03/2010 15.01.30
