ENGLISH
INSTRUCTIONS FOR USE
18
SC2000 - 9100000383
01/2015
MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions,
which are to be defined by the person in charge of the maintenance.
WARNING!
The procedures must be performed with the machine off and the battery disconnected.
Moreover, read carefully the instructions in the Safety chapter before performing any maintenance procedure.
All scheduled or extraordinary maintenance procedures must be performed by qualified personnel, or by an authorised Service
Center.
CAUTION!
When the Service icon
appears on the display (51), contact an authorised Nilfisk Service Centre for
scheduled maintenance.
This Manual describes only the simplest and most common maintenance procedures.
For other maintenance procedures shown in the Scheduled Maintenance Table, refer to the Service Manual that can be consulted
at any Service Center.
SCHEDULED MAINTENANCE TABLE
Procedure
Daily, after using
the machine
Weekly
Every six
months
Yearly
Battery Charging
Squeegee Cleaning
Brush/pad cleaning
Recovery tank and debris tray cleaning, and cover gasket check
EcoFlex™ system (optional) cleaning and draining
Squeegee blade check
Solution Filter Cleaning
Battery (WET) fluid level check
Squeegee blade replacement
Electromagnetic brake efficiency check
(1)
Brush/pad-holder motor carbon brush check or replacement
(1)
Drive system motor carbon brush check or replacement
(1)
(1)
This maintenance procedure must be performed by an authorised Nilfisk Service Center.
Summary of Contents for SC2000
Page 115: ......