Nilfisk-Advance Convertamatic 28LX, Instructions For Use Manual

Page: 24 / 42

23 - FORM NO. 041310 / CONVERTAMATIC 28/32/38LX / 280/320/380HD
AFTER USE
1 Raise the brushes (or pads) and raise the squeegee. Move the machine to a service area.
2 Turn the Master Key Switch (11) OFF and remove the key.
3 To empty the solution tank, take the Solution Drain Hose off its hanger. Direct the hose to a designated “DISPOSAL SITE” and remove
the plug. Rinse the tank with clean water. Inspect the solution hoses; replace if kinked or damaged.
4 To empty the recovery tank, take the Recovery Drain Hose (12) off its hanger. Direct the hose to a designated “DISPOSAL SITE” and
remove the plug. Rinse the tank with clean water. Inspect the recovery and vacuum hoses; replace if kinked or damaged.
5 Remove the brushes or pad holders. Rinse the brushes or pads with warm water and hang it up to dry. Allow buffing pads to dry completely
before using again.
6 Remove the squeegee, rinse it with warm water and hang it up to dry.
7 Check the maintenance schedule below and perform any required maintenance before storage.
MAINTENANCE SCHEDULE
Maintenance Item Daily Weekly Monthly Yearly
Clean Tanks X
Clean Vacuum Shut-Off Float X
Clean Brushes/Pads X
Rotate Brushes X
Clean Squeegee X
Charge Batteries X
Check Battery Electrolyte Level X
Lubrication X
Tank Maintenance X
*Service Vacuum Motor X
*Have your Advance Dealer check the carbon motor brushes once a year or after 300 operating hours.
8 Store the machine in a clean, dry place.