4
-
CarpeTron
Operator Manual
GROUNDING INSTRUCTIONS
•
Replace the plug if the grounding pin is damaged or broken.
•
The green (or green/yellow) wire in the cord is the grounding wire. When replacing a plug, this wire must be
attached to the grounding pin only.
•
Extension cords connected to this machine should be 12 gauge, three-wire cords with three-prong plugs and
outlets. Do not use extension cords more than 50 feet (15 m) long.
A grounding adapter must be installed
as shown here if only two-prong out-
lets are available. The outlet box must
be grounded and the grounding tab
(or wire) on the adapter must be in-
stalled under the head of the screw in
the center of the outlet cover. Ground-
ing adapters for 120 volt plugs are
available at most hardware stores.
Grounding adapters are not approved
for use in Canada.
GROUNDED
OUTLET BOX
METAL SCREW
TWO-PRONG
OUTLET
GROUNDING
TAB
120 VOLT PLUG
120 volt machines have this kind of three-prong
plug at the end of a three-wire electrical cord. The
grounding pin on this plug grounds the machine
when it is plugged into a three-prong outlet.
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
WARNING!
This
machine must be properly grounded to protect the operator from electrical shock. Read the safety instructions
below before operating this machine.
GROUNDED
OUTLET BOX
THREE-PRONG
GROUNDED OUTLET
GROUNDING PIN
120 VOLT PLUG
https://harrissupplyind.com - To Order Parts Call 608-268-8080