Nilfisk-Advance C 100.5 User Manual Download Page 12

13

8 Further 

information

8.1  Recycling the washer

Make the old cleaner unusable 
immediately.

1. Unplug the cleaner and cut 

the electric cable.

Do not discard electrical appli-
ances with household waste.
 

As specifi ed in European Direc-
tive 2002/96/EC on old electri-
cal and electronic appliances, 
used electrical goods must 
be collected separately and 
 recycled ecologically.

Contact your local authorities or 
your nearest dealer for further 
information.

8.2 Warranty conditions

Nilfi sk guarantees high pres-
sure washers for domestic use 
for 2 years. If your high pres-
sure washer or ac ces so ries are 
handed in for repair, a copy of 
the receipt must be enclosed.
Guarantee repairs are being 
made on the following con di-
t ions:

 that defects are attributable 

to fl aws or defects in materi-
als or workmanship. (wear 
and tear as well as misuse 
are not covered by the 
 gu a ran tee).

 that the directions of this 

instruction manual have been 
thoroughly observed.

 that repair has not been 

 carried out or attempted by 
other than Nilfi sk-trained 
service staff.

 that only original accessories 

have been applied.

 that the product has not been 

exposed to abuse such as 
knocks, bumps or frost.

 that only water without any 

impurities has been used.

 that the high pressure 

 washer has not been used 
for rental nor used com mer -
cial ly in any other way.

Repairs under this guarantee 
include replacement of defec-
tive parts, exclusive of packing 
and postage/carriage. Besides, 
we refer to your national law of 
sale.

The machine should be for-
warded to one of the service 
centres of the Nilfi sk organisa-
tion with description/spe ci fi  

ca -

ti on of the fault.

Repairs not covered by the 
guarantee conditions will be 
invoiced. (I.e. malfunctions due 
to 

Causes

 men ti o ned in section 

Troubleshooting Chart

 of the 

instruction manual).

Summary of Contents for C 100.5

















Reviews: