Nilfisk-Advance BR 1100, Instructions For Use Manual

Page: 11 / 32

FORM NO. 56041587 - Hydro-Retriever
™
3800, 2042 / BR 1100, 1100C, 1100C-XL - 11
ENGLISH / 11
INSTALL THE BRUSHES (DISC SYSTEM)
CAUTION !
Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.
1 Make sure the Key Switch (33) is off (O). To access the brush mounting plates, remove both the left and right outer side skirt assemblies from the Scrub Brush Deck (13).
Note: The skirts are held in place by two black knobs on each skirt, to separate, loosen knob(s) and pull skirt straight out.
2 To mount the brushes (or pad holders) align the lugs on the brush with the holes on the mounting plate and turn to lock in place (turn outside edge of brush towards
front of machine).
56505791 - Magna Grit 46
56505792 - Dyna Grit 80
56505793 - AgLite Grit 500
56505794 – Prolene
56505795 - ProLite
56505796 - Union Mix
56505797 - MidGrit 240
56505798 - MidLite Grit 180
DISC BRUSH APPLICATION GUIDE (SUGGESTION ONLY)
46 80 180 240 500 Union
Application
Grit Grit Grit Grit Grit Prolene Prolite Mix
Stripping:
Concrete
X X
Terrazo
X X
Ceramic/Quarry tile
X
Vinyl tile
X
General Scrubbing:
Concrete
X X X X X
Terrazo
X X X X
Ceramic/Quarry tile
X X X X
Marble
X X
Vinyl tile
X X X
Raised-rubber tile
X X
Polishing:
Raised Disc Tile
X
Marble
X
Vinyl tile
X
INSTALL THE BRUSHES (CYLINDRICAL SYSTEM)
CAUTION !
Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.
1 Make sure the Key Switch (33) is off (O). To access the brushes, swing both side skirt assemblies open. Note: The skirts are held in place by a large cotter pin on each side,
remove the pins and swing the skirt assemblies out of the way. Loosen the black knobs (one on each side) on top of the idler assemblies and remove the idler assemblies.
Slide the brush into the housing, lift slightly, push and turn until it seats. Re-install the idler assemblies, close the skirt assemblies and secure with cotter pins.
3800C / BR 1100C 2042 / BR 1100C-XL
56410298 - 46 Grit 56409944 - 46 Grit
56410297 - 80 Grit 56409943 - 80 Grit
56410296 - 180 Grit 56409942 - 180 Grit
56410293 – Polypropylene 56409924 – Polypropylene
56410295 - Stiff Nylon 56409941 - Stiff Nylon
56410294 - Soft Nylon 56409940 - Soft Nylon
CYLINDRICAL BRUSH APPLICATION GUIDE (SUGGESTION ONLY)
46 80 180 Polypro- Stiff Soft
Application Grit Grit Grit pylene Nylon Nylon
Stripping:
Concrete
X X
Terrazo X X
Ceramic/Quarry tile X
Vinyl tile X
General Scrubbing:
Concrete
X X X X X
Terrazo X X X X
Ceramic/Quarry tile X X X X
Marble X X X
Vinyl tile X X X X
Raised-rubber tile X X