VACUUM SYSTEM
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
VACUUM MOTOR REMOVAL
1
Drain the recovery tank, and tip it to the side of
the machine.
2
Drain the solution tank, disconnect the hose
from the bottom of the tank and remove the
tank from the machine.
3
Disconnect one of the battery cables.
4
See Figure 2. Remove the (4) “G” screws and
lift cover “H off of the machine, along with
FIGURE 2
bracket “I”.
5
See Figure 3. Remove the (4) “J” screws.
6
Disconnect the vacuum motor wiring connector.
7
Disconnect hose “K” from the vacuum motor assembly and remove the motor from the machine.
FIGURE 3
G
H
G
J
K
Front
BA 500
Service Manual
12
I